SpiralCool

The SpiralCool is a machine that assists in the cooling, separation and drying of hot rubber blanks produced by a preformer. This unique design allows for the hot blanks to be transported a distance of between 30 and 40 meters while only having a footprint size of around 4 foot in diameter. By allowing the rubber blanks to travel this large distance it prevents them from becoming stuck together and by using the machine's air cooler and fluid cooler it also reduces the blank's surface temperature.

There are three SpiralCools in this range:

• The Curved Flight SpiralCool
• The Corrugated Flight SpiralCool
• The Bowl SpiralCool

The Curved Flight SpiralCool uses a 750 Watt vibrator motor that had a variable speed controller. This controller allows the SpiralCool to elevate the blanks at different speeds. The curved flight machine is suited for a number of different size blanks and uses.

The Corrugated Flat Flight SpiralCool had a specially designed flight that reduces the amount of fusion between the small pellets or blanks. This SpiralCool has the option of becoming a powder SpiralCool which not only separates the blanks, but can also cover them with a layer of powder. This model SpiralCool is suited for small preforms or pellets. This SpiralCool is easy to use and reduces the amount of both time and space needed for any other method of separation / cooling.

The Bowl SpiralCool has an initial reservoir that helps in the cooling and separation of larger blanks. It also has an adjustable chute which allows the recycling of blanks which require additional cooling.

Underwater Conveyor
Standard Specifications

• Belt Dimensions:
  • Usable belt width: 18"
  • Horizontal Length: 72.2"
  • Incline Length: 59"
• Tank Height 12"
• Special water resistant belt with 2" cleats at 21.1" centers, divided to allow water to flow back into water tank.
• Adjustable legs with 3" heavy-duty nylon casters. Leg height: 12"
• Stainless steel pan underneath incline section to retain dripping water.
• Water tank equipped with water ¾ npt inlet and outlet.
• Both height and angle adjustable (no tools required).
• Motor/Drive 230/460 VAC/60hZ/3Phase Right angle gearmotor - 15 FPM
• Manual starter - overload protection.
• 12 ft grounded 460 volt line cord.
• Indexing package for water conveyor.
• Copper cooling coil for water temperature conditioning.
• 3 ambient air fans mounted on the incline section to aid in cooling and drying of parts.
• All electric controls house in NEMA 4 Enclosures

Many sizes and configurations available to meet your parts cooling needs.