Ultrasonic Cleaning
A New Era of Mold Maintenance

Traditional mold cleaning methods are time consuming, labour intensive and abrasive. By using ultrasonics for mold maintenance, the result is a cleaner mold with reduced manual input and no wear leading to large cost savings.

Ultrasonic cleaning can give the following advantages:

• Short wash process leading to reduced time spent in cleaning
• No manual labour required. An operator is not required when the machine is cleaning the mold.
• High levels of cleanliness give longer life in production.
• No abrasion of precise edges and surfaces gives longer mold life.
• No solvents needed because of aqueous process.
• Suitable for all molds, large and small.
• Machinery is simple and easy to use.

Standard features include:

• Totally stainless steel construction
• Thermal and noise insulation
• Surface skimming of liquid and a weir in wash tank
• Low level protection
• Thermostat controlled heating
• Drain valve
• Water inlet valve
• Work support grill*
• Cascade water refill*
• Rim lip ventilation channels on all stages*
• Protective guide rails*
• Submersible transducer boxes*

* Excluding m40i and m80i

Options Include

• Extraction fan
• EX-rated extraction fan
• Work platform
• Rinse tank
• (with or without heating)
• Dewatering tank with liquid
• Sight glass
• Standard baskets
• Jigs for mold plates
• Drain down / air blow off station
• Automatic lid opening / closing
• Ultrasonic rinse